Ostoskorissasi on 0 tuotetta, 0,00 € Siirry kassalle

Forge 001 GTI - 25mm Alumiini-mäntäinen tai Nomex-kalvoinen Blow-off
Hinta
150,00 €
Osamaksulla
Alkaen 8,95 €/kk
Alumiini-männällä Kiillotettu
  • Alumiini-männällä Kiillotettu
  • Alumiini-männällä Musta
  • Nomex-kalvolla

Malli:

Tilapäisesti loppunut. Toimitusaika 14 päivää.

Tilapäisesti loppunut. Toimitusaika 14 päivää.

Tilapäisesti loppunut. Toimitusaika 14 päivää.

Tilapäisesti loppunut. Toimitusaika 14 päivää.

HUOM. Yksimäntäinen tarkoitettu autoihin joissa EI ole MAFia !

An Atmospheric Dump or Blow off valve suitable for all turbo cars without an Air Flow Meter. Made from billet alloy and using a single piston this valve will run faultlessly without the need for attention and eliminates the longevity problems associated with the original diaphragm valves. Single-Piston/Diaphragm Atmospheric Valves and Valve Fitting Kits. All Forge Motorsport Single-Piston and Diaphragm Atmospheric Valves have been designed and built with the intent of venting 100% of the residual charge air remaining in your forced induction system to the atmosphere at throttle lift.
Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this valve onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of compensating for the loss of metered air through a vent-to-atmosphere valve such as this.
Please select whether you would like a black or polished silver valve using the options above.

In The Box:
1 x FMDV001GTI Valve

Kalvo venttiilissä nopealla reagoinilla varustettu Nomex-kalvo.
Käy kaikiin Turbo autoihin joissa EI OLE ILMANMÄÄRÄMITTARIA (MAF).

Made from billet aluminium, this atmospheric diverter valve dumps the charge-air to atmosphere creating the “Whoosh” sound most commonly associated with rally cars when the throttle is lifted. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. All Forge Motorsport Single-Piston and Diaphragm Atmospheric Valves have been designed and built with the intent of venting 100% of the residual charge air remaining in your forced induction system to the atmosphere at throttle lift.
Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this valve onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of compensating for the loss of metered air through a vent-to-atmosphere valve such as this.
Fitment Guide: Suitable for ALL turbo cars without an Air Flow Meter
Please select whether you would like a black or polished silver valve using the options above.

n The Box:
1 x FMDV001 Valve

If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.

“Made from billet aluminium, this atmospheric diverter valve dumps the charge-air to atmosphere creating the “Whoosh” sound most commonly associated with rally cars when the throttle is lifted. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. For applications where the valve may be subject to dusty conditions a filter is used to prevent particals entering the valve. Single-Piston/Diaphragm Atmospheric Valves and Valve Fitting Kits. “All Forge Motorsport Single-Piston and Diaphragm Atmospheric Valves have been designed and built with the intent of venting 100% of the residual charge air remaining in your forced induction system to the atmosphere at throttle lift. Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this valve onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of compensating for the loss of metered air through a vent-to-atmosphere valve such as this. “