Ostoskorissasi on 0 tuotetta, 0,00 € Siirry kassalle

Audi TT 2.0TFSI 230hp ( vm. 2014 - ) - REVO-ohjelmistopäivitys
Alkaen
860,00 €
Osamaksulla
Alkaen 50,10 €/kk
Audi TT 2.0TFSI 230hp ( vm. 2014 - ) - REVO-ohjelmistopäivitys
  • Audi TT 2.0TFSI 230hp ( vm. 2014 - ) - REVO-ohjelmistopäivitys
  • Audi TT 2.0TFSI 230hp ( vm. 2014 - ) - REVO-ohjelmistopäivitys
  • Audi TT 2.0TFSI 230hp ( vm. 2014 - ) - REVO-ohjelmistopäivitys

Malli:

Varastossa

Tilapäisesti loppunut. Toimitusaika 10 päivää.

Vakiona: 230hp ja 370Nm.

REVO STG 1: 314-334hp ja 434-488Nm
- Softan mukana nopeuden rajoitin poistuu

Tuloksen AINA olosuhteista, käytetyn bensan ja HW-osien laadusta riipuen.
Lue lisää tehon mittaamisesta:
http://www.revotechnik.com/support/technical/peak-power-figures-explained

0 – 60 mph: vakiona 5.30s, REVO STG1 keskiarvo 4.19s, REVO paras tulos 4.09s
0 – 100 mph: vakiona 13.73s, REVO STG1 keskiarvo 10.12s, REVO paras tulos 9.99s
30 – 70 mph: vakiona 4.72s, REVO STG1 keskiarvo 3.71s, REVO paras tulos 3.67s

SPS:llä:
Setting #1 on your SPS sets your vehicle to stock*
Setting #2 on your SPS sets your vehicle to Revo Performance mode A (Tuned for lower octane pump fuel/poor operating conditions)
Setting #3 on your SPS sets your vehicle to Revo Performance mode B (Tuned for high octane pump fuel/good operating conditions)
Setting #4 on your SPS sets your vehicle to Anti-Theft mode
*NOTE: Stock mode is not completely stock, it will run similar performance levels to a stock vehicle. Your Revo dealer has a complete factory stock file, if any main dealer warranty or servicing work is required, we recommend returning your vehicle to complete stock.

There are options for which performance modes are flashed to your vehicle:
95ron, 97ron and Anti-Theft
95ron, 98ron and Anti-Theft

Stage 1 software details for your AUDI, TT MK3 (2014 >), 2.0 TFSI (230ps)
Performance Software
All Revo performance Software is designed to safely enhance the drive-ability of your vehicle, giving access to more power and torque throughout the rev-range while maintaining the extensive factory safety mechanisms. Although Revo offer some of the most substantial performance increases on the market, peak figures form part of a much bigger picture and are never the sole focus during development. Revo Software offers a perfect balance of performance, economy, longevity and safety.

With an impressive 226bhp as standard matched with a fantastic chassis, this isn’t a slow car but even our initial feasibility studies showed huge room for improvement. Our R&D involved months of extensive beta testing on cars all over the globe; in Russia, South Africa, Germany, Asia, the USA and the UK ensuring our testing covered an array of atmospheric variations.

Our Stage 1 software upgrade is flashed through the ODB-II port leaving the factory ECU intact and providing peak gains well in excess of 300BHP. Whilst the peak gains are impressive, this doesn’t tell the full story; our software has been refined to give you increased torque and power throughout the rev range without compromising on driveability, smoothness or power delivery. What does this mean in the real world? Well, our own development vehicles see the 0-60mph sprint in just over 4 seconds (on road tyres with regular pump fuel).

Research and Development
Testing facilities at their UK Headquarters and US Development Facility, as well as a track office at Bruntingthorpe Proving Ground, Revo are able to test their products extensively on and off track. Testing products in this way is paramount to ensuring that along with more useable power and torque comes refined drive-ability, something often overlooked.

Development Vehicles
Access to vehicles is imperative to development and testing. Revo run one of the most extensive fleets in the industry, and have access to hundreds of other beta vehicles via a global Authorised Dealer Network. These vehicles not only demonstrates what is capable using Revo products, which cover thousands of miles in a multitude of climates, but also ensures that vehicles perform in any scenario, from a trip to the local shops to an epic adventure in the Alps.

On-Road Testing
Testing on a dyno will only ever tell part of the story. Revo believe in data-logging on the road and racetrack as well as testing in controlled dyno conditions, to give you a clearer picture of the performance you can expect. This plays an important role in the Revo development process, ensuring the highest quality products that perform where and when it matters most.