Ostoskorissasi on 0 tuotetta, 0,00 € Siirry kassalle

Audi Seat Skoda VW 2.0TSI REVO IS38ETR STG 3 ahdinpaketti
Alkaen
2 850,00 €
Osamaksulla
Alkaen 166,00 €/kk

Malli:

Tilapäisesti loppunut. Toimitusaika 30 päivää.

Tilapäisesti loppunut. Toimitusaika 15 päivää.

Tuleeko ahdin asennettavaksi

Vakio autoon tällä REVO IS38ETR paketilla + STG 3 softalla esim. +171HP ja +185NM vakio Golf VII R:n.
Eli 450HP@pyöristä ja +173HP 6500rpm ja 215NM 2800RPM (mitattu Dynapack Hub Dynolla).
Tulokset 470-520hp riippuen auton HW-osista, käytetystä polttoaineesta, käytetystä dynosta ja olosuhteista jne jne
Vain poikittaiskoneisiin sopiva.

AUDI A3 (8V vm.2012 >) 220hp = 386-423hp ja 469-529Nm
AUDI S3 300hp = 450-510hp ja 499-549Nm
AUDI TT MK3 (vm.2014 >) 230hp = 386-423hp ja 469-529Nm
AUDI TTS 310hp = 450-510hp ja 499-549Nm
SEAT Leon MK3 Cupra (vm. 2012 >) 280hp, 290hp, 300hp = 440-510hp ja 485-549Nm
SKODA Superb MK3 (vm. 2015 >) 280hp = 450-510hp ja 499-549Nm
SKODA Octavia MK3 (vm.2013 >) = 386-423hp ja 469-529Nm
VOLKSWAGEN Golf VII 220hp = 386-423hp ja 469-529Nm, R = 300hp = 450-510hp ja 499-549Nm

Autossa oltava / asenettava myös REVOn STG 3 softalle:
- Downpipe with Sports CAT or decat*
- High Flow Exhaust System
- Revo Intercooler
- Revo Carbon Series Intake System (Front Scoop, Lid and Turbo Inlet hose)
- Revo Intercooler Pipe upgrade

Lisäksi suositellaan:
- Revo Big Brake Kit
- Revo Engine Mounts
- Uprated clutch on manual vehicles
- Uprated suspension
- Revo RV019 Wheels

Tarjolla myös kampanja paketteja muiden STEG 1 ( kun REVO ) softien omistajalle, kysy!

A direct replacement for the IHI Turbo found on 2.0 TSI EA888 GEN3 engines, the IS38ETR is an enhanced version of the OEM IS38 housing, providing over 45% more flow capability offering the potential of over 500HP. Revo Hardware and Software are the key to achieving this performance and have been developed to work in harmony with the ETR upgrade.

- Capable of 500HP +
- 45% More Flow Capacity
- Bespoke uprated bearing system
- Enhanced compressor and turbine wheels
- Designed in harmony with Revo Software

BEAUTIFULLY SIMPLE, DEVASTATINGLY FAST.
The Revo IS38ETR Enhanced Turbo offers exhilarating performance like no other. With over two years of extensive development and global testing, Revo offers a reliable package capable of over 500HP without the need to upgrade engine internals or DSG clutches.
Only Revo Enhanced Turbos are specifically designed to work in harmony with your vehicle and Revo Software. Engineered to directly replace the stock turbo, the Revo IS38ETR is a high-quality upgrade, precision balanced to levels above OEM specification to improve performance and ensure reliability.
A direct replacement for the IHI Turbo found on 2.0 TSI EA888 GEN3 engines, the IS38ETR is an enhanced version of the OEM IS38 housing, providing over 45% more flow capability offering the potential of over 500HP. Revo Hardware and Software are the key to achieving this performance and have been developed to work in harmony with the ETR upgrade.

Turbo Features
The high-performance Revo IS38ETR offers a significant upgrade over the stock IS38 whilst maintaining the original fitment and compressor and turbine housings. The compressor and turbine housings have been CNC re-profiled to match the larger wheels and stronger shaft, also allowing room for a bespoke heatshield matched to the increased internal diameters. Strength is a key factor to the IS38ETR, a replacement back-plate machined from a billet piece offers a greater resistance to warping. The larger bearing housing has also been upgraded to make room for a specifically designed bearing system, incorporating a reinforced thrust bearing. Precision balanced to levels above the OEM specification reduces vibration to the lowest possible level and improves performance and reliability of the turbocharger.

COMPRESSOR WHEEL
The stronger construction of the compressor wheel, which is machined from solid billet aluminum, features a slimmer nose, hub and back design along with thinner longer blades and tapered tips. This lightweight construction of the compressor wheel ensures low inertia, in turn increasing performance. The 3D image shows both the compressor wheel (larger) with turbine wheel and shaft.

TURBINE WHEEL AND SHAFT
The precisely engineered turbine wheel and shaft provide sufficient power to the compressor, converting the engine exhaust gas into mechanical energy to drive the compressor, without the need to cut back blades or compromise efficiency. Incorporating a larger diameter shaft provides increased strength and durability at high power levels.

INTEGRATED RECIRCULATION SYSTEM
The integrated recirculation valve is fundamentally a blow-off valve integrated into the compressor housing. When the throttle valve is closed and the pressure in the inlet drops, the valve opens and air from the discharge side of the compressor is diverted back into the inlet of the compressor. This helps to avoid the compressor going into surge.

TURBO MUFFLER DELETE
The Revo Turbo Muffler Delete offers a high-quality single piece replacement for the OEM part which allows for smoother uninterrupted air flow, increasing throttle response and providing improved turbo acoustics. Its single-piece design allows air a more direct path when exiting the turbo, smoothing flow to offer enhanced throttle and boost response. This part comes complete with a high-temperature gasket to ensure a secure seal when installed.

RESEARCH AND DEVELOPMENT
Utilising decades of experience in software calibration and precision turbo engineering, Revo is proud to offer a package that provides the performance you demand and the reliability you expect.

The IS38ETR forms one part of this package; with all available Revo hardware and software having been designed and tested to work in harmony to achieve exhilarating performance that only the driven demand; the result of an extensive two-year development, testing and prototyping programme.

The aim from the outset was to achieve a balance of top end power and bottom end response, without having to forge internals and where possible, avoid upgrading any of the fuel systems. Combining extensive turbocharger manufacture experience with Revo’s industry-leading ECU calibration and hardware design, we have been able to achieve incredible performance results without compromising on component reliability or engine longevity. Every turbo is balanced precisely to ensure performance and turbo acoustics.

GLOBAL DEVELOPMENT PROGRAM

With over two years of exhaustive testing utilising our in-house facilities and test vehicles, the IS38ETR has carried out thousands of miles on a multitude of platforms; and development didn’t stop there. The package was introduced into the Revo Global Development Programme to ensure consistency in varying conditions and climates. Fitted to over eighty vehicles worldwide, the package has been tested in a wide range of scenarios and conditions, from Russian winters to South African summers, race tracks to daily driving, to ensure ultimate performance, reliability and power.

PERFORMANCE GAINS

The following testing was carried out on a VW Golf MK7 R running stock engine and fuel system, on Shell Power 99ron Pump fuel. Revo Stage 3 ECU & DSG Software installed, fitted with a Revo Carbon Series Air Intake System, Revo Intercooler, Revo Intercooler Pipe Upgrade kit and a 200-cell sports cat downpipe and exhaust

The Revo IS38ETR offers significant performance gains over any stock turbo setup, with peak gains of 171HP at the hub and 185NM torque over a stock IS38 VW Golf R. That’s over 450HP at the hubs and maximum increases of 173HP 6500rpm and 215NM 2800RPM, all recorded on a Dynapack Hub Dyno. However, over the two years of global development, numerous vehicles have been run on various dyno types, running between 470 to 520BHP, depending on dyno setup, hardware and fuel quality.